< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=927447991225488&ev=PageView&noscript=1" />
News Center

Ten points for maintenance of stainless steel pipe making machine equipment



The maintenance of the welded pipe equipment of the stainless steel pipe making machine is very important. Proper maintenance can greatly extend the service life of welded pipe equipment, improve its safety and stability, and ensure the quality of welded pipe.

Ten points for maintenance of stainless steel pipe making machine equipment:

1.The horizontal frame is a two-way side-out truss bracket. When the cymbal needs to be replaced, loosen the outer bracket fixing bolts. ? Pull out the outer support? Side change, simple and convenient. The reduction of the frame is carried out on both sides separately, and the adjustment is flexible. ? Convenient? High precision.

2. The vertical position can be adjusted horizontally or individually in the base. It can also be adjusted vertically, which is convenient. Rolling bearings are rolling bearings.

3. The loading frame adopts a rotatable parallel four-link cantilever double reel mechanism, which can be wound during the working process of the unit. This can reduce preparation time and enable continuous production of the device without bending needles.

4. The centerline of the first two welding grinder spindles and the rolling centerline form an angle of +/- 45°, which can be adjusted. The welds are polished from two directions in a staggered direction, the center of the latter being the center of the welder. The welding seam is directly ground at a 90 degree angle with the rolling center line to make the polishing effect better.

5. The electrical configuration of the stainless steel pipe welding unit adopts frequency control.

6. Using frequency control technology, high speed sensitivity, smoothness, low noise, and lower power consumption.

7. The molding machine and size are driven by a single motor, and the structure is compact. ? Maintenance is simple. ? Lifting? Installation? Easy to operate.

8. Use cross universal joint coupling to rotate, turn the button huge? Long life? Neat? Beautiful? Lightweight. 9. The horizontal frame is a rotating frame, which rotates through the worm gear box and the coupling. There is a 4-speed gearbox (1 reverse gear) between the worm gear box and the motor, which makes the unit easier to operate and more stable rolling.

For the oil pump setting of the internal leveling machine, although there is a filter inside, the customer still needs to perform regular cleaning work to ensure that the oil pump will not be blocked. The air passage of the oxygen sensor should also be cleaned regularly to prevent excessive oil. Block to avoid short circuit.