Tube Mill Daily Maintenance Checklist
Category:
2020-01-09
Maintenance Guide
NO. |
Maintenance Project |
Method & Period |
1 |
Stands,shafts |
Visual inspection, bracket fastening, bearing smooth operation; Twice daily |
2 |
Drive the connecting shaft |
Connection is reliable and stable running; Twice daily; Filling Lubricants, once a month . |
3 |
Turbine |
Whether the lubricant is in place, once a month . |
4 |
Gearbox |
Check the lubrication and oil filling, once a month . |
5 |
Water & Gas |
Check whether the flow and pressure is normal, whether leak leakage; Twice daily |
6 |
Electric appliance& Welded machine |
Check the voltage current numerical, buttons and running state,twice daily. Welding machine and motor dust cleaning, once a month . |
7 |
Grinding machine & Cutting machine |
Check the motor running condition, belt firmness, voice, twice daily. |
8 |
Mould |
Check the running status, presence of wear and tear, cooling is in place, Six times a day |
9 |
Air cylinder |
Check the running status, presence of air leakage, wear and tear, twice daily. |
10 |
Equipment & Environmental health |
Wash the equipment surface pollution and dust, once a day; Cleaned around health equipment, tools and bad product, once a day; Cleaning machine water tank with water pollution,once a week. |
State: Mould is one of the important fittings pipe. After the mould offline cleaned by diesel. Move to the designated mold frame, inspected, identified. |
Keywords:
tube,mill