Tube Mill Daily Maintenance Checklist

Category：

2020-01-09

Maintenance Guide

NO.	Maintenance Project	Method & Period
1	Stands,shafts	Visual inspection, bracket fastening, bearing smooth operation; Twice daily
2	Drive the connecting shaft	Connection is reliable and stable running; Twice daily; Filling Lubricants, once a month .
3	Turbine	Whether the lubricant is in place, once a month .
4	Gearbox	Check the lubrication and oil filling, once a month .
5	Water & Gas	Check whether the flow and pressure is normal, whether leak leakage; Twice daily
6	Electric appliance& Welded machine	Check the voltage current numerical, buttons and running state,twice daily. Welding machine and motor dust cleaning, once a month .
7	Grinding machine & Cutting machine	Check the motor running condition, belt firmness, voice, twice daily.
8	Mould	Check the running status, presence of wear and tear, cooling is in place, Six times a day
9	Air cylinder	Check the running status, presence of air leakage, wear and tear, twice daily.
10	Equipment & Environmental health	Wash the equipment surface pollution and dust, once a day; Cleaned around health equipment, tools and bad product, once a day; Cleaning machine water tank with water pollution,once a week.
State: Mould is one of the important fittings pipe. After the mould offline cleaned by diesel. Move to the designated mold frame, inspected, identified.